Enabling Javascript For Internet Explorer; Logging In To The Web Interface - HPE Edgeline EL8000 Setup And Configuration Manual

Pop-up windows—Pop-up windows must be enabled for certain features to function correctly. Verify that pop-up blockers
•
are disabled.
TLS—To access the Edgeline EL8000 Chassis Manager web interface, you must enable TLS 1.0 or later in your browser.
•
Supported browsers
Edgeline EL8000 Chassis Manager supports the latest versions of the following browsers:
• Microsoft Edge
• Mozilla Firefox
• Google Chrome mobile and desktop
• Microsoft Internet Explorer 11

Enabling JavaScript for Internet Explorer

Some versions of Internet Explorer have JavaScript disabled by default. Use the following procedure to enable JavaScript.
Procedure
1. Start Internet Explorer.
2. Select Tools > Internet options.
3. Click Security.
4. Click Custom level.
5. In the Scripting section, set Active scripting to Enable.
6. Click OK.
7. Refresh your browser window.

Logging in to the web interface

Procedure
1. Enter https://<EL8000CM host name or IP address>
When you access the Edgeline EL8000 Chassis Manager web interface, you must use HTTPS (HTTP exchanged over an
SSL encrypted session).
The Edgeline EL8000 Chassis Manager login page opens. If a login security banner is configured, the banner text is
displayed above the login section.
2. Enter a local account Username and Password, and then click Log In.
TIP: When logging in to the Edgeline EL8000 Chassis Manager web interface for the first time:
• The default username is Administrator. The username is case sensitive.
• The default password is printed on the label attached to the chassis.
26 Configuration