Configuring Ipv6 Settings; Ipv6 Configuration Settings - HPE Edgeline EL8000 Setup And Configuration Manual

Converged edge system
Table of Contents

Advertisement

Tertiary DNS Server
This value is supplied automatically when DHCP is enabled. If you are using a static IP address, no name servers are used.

Configuring IPv6 settings

Prerequisites
Edgeline EL8000 Chassis Manager Admin privilege
Procedure
1. Click Network in the navigation tree.
2. Click the IPv6 tab.
3. Configure the Global IPv6 Configuration setting.
4. Configure the IPv6 Configuration settings.
5. Configure the DNS Configuration settings.
6. To save the changes you made on the IPv6 Settings page, click Apply.
7. If you are finished configuring the Edgeline EL8000 Chassis Manager network settings, restart Edgeline EL8000 Chassis
Manager.
It might take several minutes before you can re-establish a connection.

IPv6 Configuration settings

Global IPv6 Configuration
Client Applications use IPv6 first
This option specifies which protocol Edgeline EL8000 Chassis Manager is tried first when accessing a client application. It
is useful when both IPv4 and IPv6 service addresses are configured for Edgeline EL8000 Chassis Manager client
applications. This setting also applies to lists of addresses received from the name resolver when using FQDNs to
configure NTP.
Enable this option if you want Edgeline EL8000 Chassis Manager to use IPv6 first.
Disable this option if you want Edgeline EL8000 Chassis Manager to use IPv4 first.
If communication fails when attempting to use the first protocol, Edgeline EL8000 Chassis Manager automatically tries the
second protocol.
This option is enabled by default.
IPv6 Configuration
Enable IPv6 in Auto Mode
Enable this option to configure Edgeline EL8000 Chassis Manager to use an IPv6 DHCP server (if found). If no IPv6 DHCP
server is available, IPv6 automatically falls back to using SLAAC. This option is enabled by default.
Edgeline EL8000 Chassis Manager creates its own link-local address even when this option is not enabled.
IPv6 Static Address
When assigning static IPv6 addresses, enter the main IP address here.
Configuration
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents