Flashforge Guider II User Manual page 53

6.2.14 Tool Menus
Contr ol Panel
①
After connecting PC with GuiderⅡ, click [Tools]--[Contr ol Panel] to open the
control panel.
● J og Contr ols
a. J og Mode：Select the distance that extruder/ build plate move a single time (that is,
the distance extruder/ build plate move upon your single click).
b. Six blue ar r ow dir ection buttons: Control the move along X/Y/Z axis. X/Y axis
button control extruder move, Z axis button control build plate move. Click X-,
extruder will move leftward a specified distance; Click X+, extruder will move a
specified distance rightward. Click Y-, extruder will move forward a specified
distance; Click Y-, extruder will move backward a specified distance. Click Z-, build
plate will move upward a specified distance; Click Z-, build plate will move
downward a specified distance. (Specified distance refers to the move distance you set
in Jog Mode.
c. Stop: Click the [Stop] button to abort the current movement.
d. XYZ coor dinate fr ame on the r ight side: Show the current position of
GuiderⅡ User Guide | www.flashforge.com
52