Chapter 7: Basic Printing; Generate A Gcode - Flashforge Guider II User Manual

Chapter 7: Basic Pr inting
34
This chapter will provide a step-by-step guide on turning a 3D model into a physical
reality. Before proceeding, it is recommended that you'd better go over prior chapters
on loading/unloading filament, leveling the build platform, and the functions and
capabilities of FlashPrint.
7.1 Gener ate a Gcode
(7-1)Double-click the icon of FlashPrint to start the software.
7-1
FlashFor ge Guider Ⅱ
(7-2)Click [Pr int]--[Machine Type] to select
7-2
(7-3)Click the [Load] icon to load a .stl model file and the object will display on the
build area.
7-3
[Edit]--[Sur face to Platfor m] to make your model perfectly positioned
（7-4）Click
GuiderⅡ User Guide | www.flashforge.com
56