Flashforge Guider II User Manual page 51

Hide thumbs Also See for Guider II:

Table of Contents

Click

[Edit]--[Suppor ts]

to enter supports setting interface.

6.2.13 Pr int Menus

① Connect Machine

You can connect the Guider Ⅱ with your PC via USB cable or WiFi or Ethernet

Cable.

Note: The machine icon on the bottom right displays the connection status:

Connected

Disconnected

Method 1：Connect Via USB Cable

a. Connect your GuiderⅡ with your PC via an USB cable.

b. Turn on your GuiderⅡ and start FlashPrint.

c. Click

[Pr int]--[Connect

Machine], then select USB in the

[Connection Mode]

option and select machine you want to connect in

[Select Machine]

option. If you can

not find your machine, click the

[Rescan]

button to scan your machine and select it.

Finally click

[Connect]

button to connect to the printer. If you still can not find your

machine after rescan, it means you haven't installed the driver in the software.

GuiderⅡ User Guide | www.flashforge.com

Table of Contents

Show Quick Links

Table of Contents