Connect Printer With Pc; Print; Generate Gcode File; Pattern - Flashforge FINDER User Manual

Before connecting the printer with PC, Click[Print]--[Machine Type] to
select your machine type. After connection, the software will
automatically recognize and choose your machine type, manual operation
is invalid now. The selection of machine type will confirm the framework
volume, which will influence the slicing result.
2.8.2

Connect Printer with PC

Before this step, we need to do setup for the printer(refer to Section
2.9.1.1)

2.8.3 Print

2.8.3.1 Generate Gcode File

You need to slice the model before printing(printable file is generated by
slicing the model). The following is operation process.

(1)Pattern

Step 1: Click [Print]--[]Print or click the Print icon on main interface,
dialog of slicing parameters will show up.
Finder User Guide| www.ff3dp.com