Panduit Atlona Omega AT-OME-SR21 Manual
  1. Manuals
  2. Brands
  3. Panduit Manuals
  4. Media Converter
  5. Atlona Omega AT-OME-SR21
  6. Manual

Panduit Atlona Omega AT-OME-SR21 Manual

4k/uhd scaler for hdbaset and hdmi with usb
Hide thumbs Also See for Atlona Omega AT-OME-SR21:
Table of Contents

Advertisement

Quick Links

Download this manual
4K/UHD Scaler
for HDBaseT and HDMI with USB
Atlona Manuals
AT-OME-SR21
Scaler / Receiver

Advertisement

Table of Contents
loading

Related Manuals for Panduit Atlona Omega AT-OME-SR21

Summary of Contents for Panduit Atlona Omega AT-OME-SR21

  • Page 1 4K/UHD Scaler for HDBaseT and HDMI with USB Atlona Manuals AT-OME-SR21 Scaler / Receiver...
  • Page 2 Version Information Version Release Date Notes 02/19 Release AT-OME-SR21...
  • Page 3 Welcome to Atlona! Thank you for purchasing this Atlona product. We hope you enjoy it and will take a extra few moments to register your new purchase. Registration only takes a few minutes and protects this product against theft or loss. In addition, you will receive notifications of product updates and firmware.
  • Page 4 Atlona, Inc. (“Atlona”) Limited Product Warranty Coverage Atlona warrants its products will substantially perform to their published specifications and will be free from defects in materials and workmanship under normal use, conditions and service. Under its Limited Product Warranty, Atlona, at its sole discretion, will either: •...
  • Page 5 Atlona, Inc. (“Atlona”) Limited Product Warranty • Damage, deterioration or malfunction resulting from the installation or removal of this product from any installation, any unauthorized tampering with this product, any repairs attempted by anyone unauthorized by Atlona to make such repairs, or any other cause which does not relate directly to a defect in materials and/or workmanship of this product.
  • Page 6 Important Safety Information 9. Do not defeat the safety purpose of a polarized CAUTION or grounding-type plug. A polarized plug has two RISK OF ELECTRIC SHOCK blades with one wider than the other. A grounding DO NOT OPEN type plug has two blades and a third grounding CAUTION: TO REDUCT THE RISK OF prong.

  • Page 7: Table Of Contents

    Table of Contents Introduction Features Package Contents Panel Description Installation Captive Screw Connections Mounting Instructions Connection Instructions IP Modes Connection Diagram WebGUI Video Settings Audio Display RS-232 Config System HDBT Appendix Specifications AT-OME-SR21...

  • Page 8: Introduction

    Introduction The Atlona AT-OME-SR21 is an HDBaseT receiver and 4K/UHD scaler with a local HDMI input. Part of the Omega™ Series of integration products for modern AV communications and collaboration, the OME-SR21 receives HDBaseT for video up to 4K/60 4:2:0, plus embedded audio, control, Ethernet, and USB over distances up to 330 feet (100 meters).

  • Page 9: Panel Description

    Panel Description AT-OME-SR21 LINK OMEGA OMEGA DEVICE IP INPUT PATTERN HDMI IN USB HUB HOST USB AT-OME-SR21 IP MODE C1 COM C2 HDBaseT IN OUTPUT RESET RS-232 RELAY DC 24V PWR LED 10 HDBaseT IN Illuminates green when receiving power. Connect a compatible HDBaseT transmitter to this port.

  • Page 10: Installation

    Installation Captive Screw Connections RS-232 A 5-pin captive screw connector has been included for RS-232. NOTE: Port 1 will control the display and port 2 is for unit control. Pin out will be determined by the RS-232 cable and connect as RX (receive), TX (transmit) and (Ground).

  • Page 11: Mounting Instructions

    Installation Mounting Instructions The AT-OME-SR21 includes two mounting brackets and four mounting screws, which can be used to attach the units to any flat surface. 1. Remove the top 2 case screws on the side of the unit. 2. Align the mounting brackets to the side of the units. 3.

  • Page 12: Connection Instructions

    Installation Cable Recommendation Guidelines Refer to the tables below for recommended cabling when using Altona products with HDBaseT. The green bars indicate the signal quality when using each type of cable. Higher-quality signals are represented by more bars. CAT5e CAT6 CAT6a CAT7 Core...

  • Page 13: Ip Modes

    Installation IP Modes DHCP By default, the AT-OME-SR21 is set to DHCP mode. In this mode, when the AT-OME-SR21 is connected to the Local Area Network (LAN), it will automatically be assigned an IP address by the DHCP server (if available). Press the DEVICE IP button to show the IP address in the top left corner of the display.

  • Page 14: Webgui

    WebGUI The AT-OME-SR21 includes a built-in webGUI, which allows easy remote management and control of all features. Follow the instructions below to access the webGUI. 1. Make sure that an Ethernet cable is connected between the LAN port on the AT-OME-SR21 and the network. 2.

  • Page 15: Video Settings

    webGUI Video Settings Select Video from the top navigation to adjust routing and video settings. Prefer Timing HDBaseT/HDMI - Select the source resolution to be passed. Options are: Native, 1280x800, 1920x1080, 1024x768, 1280x720, 1920x1200, 1366x768, 800x600, 1600x900, 2560x1440, 3840x2160, and 1440x900. Na- tive will allow the EDID handshake to determine the correct resolution for the source.
  • Page 16 webGUI Output Input Selection - Use the drop down menu to switch between A/V Mute (no signal), HDMI, HDBaseT, internal pattern 1, internal pattern 2, and internal pattern 3 source signals. Scaler Pass-Through - When enabled (on), the unit will pass the highest common resolution between source and display.

  • Page 17: Audio

    webGUI Audio Select Audio from the top navigation to adjust volume, mute status, and EQ levels. Output Audio Mute On/Off - Mute and unmutes all audio output signals. HDMI / L/R On - Unmutes the audio output signal, allowing audio to pass through the outputs. HDMI / L/R Off - Mutes the audio output signal of the ports.

  • Page 18: Display

    webGUI Display Select Display from the top navigation to adjust display control settings. Command: Power - Press to send the CEC power on or off command out through the HDMI port. Command: Volume - Press to send the CEC Volume up, down, or mute commands through the HDMI port. System Settings Display Auto Power On - Sets the unit to send the display power on command to the output, after the power on delay timer, when signal is received.
  • Page 19 webGUI TCP/IP Settings of Controlled Device IP Mode - Toggle telnet login mode between Non-Login and Login. If set to Login, a username and password will be required to control the unit via TCP/IP. IP Address - Sets to the IP of the controlled device/display. Port - Set the port of the controlled device for control.

  • Page 20: Rs-232

    webGUI RS-232 Select RS-232 from the top navigation to adjust the zone control parameters for the RS-232 port. RS-232 Parameter Setting RX RS232 1 - Select the baud rate, data bit, parity, and stop bit to match the SR21’s parameters. Defaults are 9600, 8, None, and 1.

  • Page 21: Config

    webGUI Config Select Config from the top navigation to adjust user settings. Users Admin Password - Update the admin password for the switcher. Only the admin password may be changed, the username will remain admin. Additional Users - Add up to three additional users, each with individual passwords. NOTE: The passwords cannot contain any special characters.

  • Page 22: System

    webGUI System Select System from the top navigation to adjust relay, network, or system options. Relay Control - Set the relay to either follow the display’s status (on: c1-close c2-open, off: c1-open c2-close) or be manually set using the selectors in the webGUI. Relay - When the relay is set to manual, select the sliders to open and close the com ports.
  • Page 23 webGUI Network MAC Address - Displays the MAC address of the unit. IP Mode - Switch between static and DHCP IP modes. IP, Netmask, Gateway - This will display the unit’s current DHCP IP settings. When set to static, fill in the IP address, netmask, and gateway.

  • Page 24: Hdbt

    webGUI HDBT Select HDBT to open the HDBaseT cable test page. This page will check extender versions, cable status and length, and Video Quality. HDBT Test HDBaseT Zone - Use the drop down menu to select which HDBaseT input is being tested. Only active connections can be tested.

  • Page 25: Appendix

    Appendix Specifications Video HDMI HDCP UHD/HD/SD 4096x2160@60 /50/30/25/24Hz, 3840×2160@60 /50/30/25/24Hz, 1080p@60/5 9.9/50/30/29.97/25/24/23.98Hz, 1080i@30/29.97/25Hz, 720p@60/59.94/50Hz, 576p@50Hz, 576i@25Hz, 480p@60/59.96Hz, 480i@30Hz VESA 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1440×900, 1400×1050, 1280×1024, 1280×800, 1366×768, 1360×768, 1152×864, 1024×768, 800×600, 640×480 Scaler Up/Down 1024x768p60, 1280x720p50, 1280x720p60, 1280x768p60, 1280x800p60, 1360x768p60, 1600x1200p60, 1920x1080p24, 1920x1080p25, 1920x1080p50, 1920x1080p60, 1920x1200p60, 2048x1080p60, 3840x2160p24, 3840x2160p25, 3840x2160p30, 3840x2160p50, 3840x2160p60, 4096x2160p24, 4096x2160p25,...
  • Page 26 Appendix Control RS-232 1-way connected display control 2-way device control and monitoring Supported baud rates: 2400, 4800, 9600, 19200, 38400, 57600, 115200 Full duplex 100Mbps CEC Support Relay Normally open (NO), adjustable Toggle and Pulse modes Electrical rating: 48V@1A Resolution / Distance 4K/UHD - Feet / Meters 1080p - Feet / Meters HDMI IN/OUT...
  • Page 27 Appendix Weight Pounds Kilograms Device 1.96 0.89 Certification Device CE, FCC, UL AT-OME-SR21...
  • Page 28 Toll free US International atlona.com 877.536.3976 41.43.508.4321 • • © 2019 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners. Pricing, specifications and availability subject to change without notice.

Table of Contents