Panduit ATLONA AT-OMNI-121 Installation Manual
  1. Manuals
  2. Brands
  3. Panduit Manuals
  4. Media Converter
  5. Atlona OmniStream AT-OMNI-121
  6. Installation manual
Panduit ATLONA AT-OMNI-121 Installation Manual

Panduit ATLONA AT-OMNI-121 Installation Manual

Omnistream 121 single-channel networked av decoder
Hide thumbs Also See for ATLONA AT-OMNI-121:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
OmniStream 121 Single-Channel Networked AV Decoder
AT-OMNI-121
The Atlona AT-OMNI-121 is a networked AV decoder for HDMI / HDCP 2.2 output supporting
resolutions up to 4K/60 4:4:4 and HDR (High Dynamic Range), plus audio embedding and
de-embedding, and RS-232 or IR control pass-through. OmniStream is designed for high
performance, flexible distribution of AV over standard, off-the-shelf Gigabit Ethernet switches
in commercial audiovisual applications. The OMNI-121 decoder features the advanced VCx™
codec which delivers 4K/60 4:4:4 video from encode to decode, with artifact-free presentation of
computer-generated content and fast-motion video, and ultra-low latency less than one frame.
Additionally, the OMNI-121 features multiview window processing, with the ability to ingest up to
four streams from AT-OMNI-111 encoders and display them simultaneously on a single screen.
This decoder is housed in a half-width rack enclosure with front-to-back air flow, and is ideal for
high-density, compact installation in distributed, multi-display installations.
Package Contents
1 x AT-OMNI-121
1 x Captive screw connector, 3-pin
1 x Captive screw connector, 5-pin
1 x Push spring connector, 6-pin
2 x Push spring connectors, 5-pin
1 x Wall/table mounting brackets
Operating Notes
•
OmniStream uses mDNS as the discovery mechanism. In order for mDNS to function
properly, there must not be restrictions applied to the network.
IMPORTANT: Visit http://www.atlona.com/product/AT-OMNI-121 for the latest
firmware updates and User Manual.
1
Installation Guide
AT-OMNI-121

Advertisement

Table of Contents
loading

Related Manuals for Panduit ATLONA AT-OMNI-121

Summary of Contents for Panduit ATLONA AT-OMNI-121

  • Page 1 OmniStream 121 Single-Channel Networked AV Decoder AT-OMNI-121 The Atlona AT-OMNI-121 is a networked AV decoder for HDMI / HDCP 2.2 output supporting resolutions up to 4K/60 4:4:4 and HDR (High Dynamic Range), plus audio embedding and de-embedding, and RS-232 or IR control pass-through. OmniStream is designed for high performance, flexible distribution of AV over standard, off-the-shelf Gigabit Ethernet switches in commercial audiovisual applications.

  • Page 2: Panel Descriptions

    Installation Guide AT-OMNI-121 Panel Descriptions LINK TREAM AUDIO RX TX RS-232 HDMI OUT ETHERNET DC 48V AT-OMNI-121 ETHERNET This LED indicator is green when the unit is Connect an Ethernet cable from this port to powered and booted. the Local Area Network (LAN). LINK RS-232 This LED indicator is green when the link...

  • Page 3: Installation

    Installation Guide AT-OMNI-121 Installation Connect an Ethernet cable from the ETHERNET port on the decoder to a PoE-capable switch on the Local Area Network (LAN). Note that if a PoE-capable switch is not available, the 48V DC power supply (sold separately) must be connected to the decoder. Connect an HDMI cable from the UHD/HD display to the HDMI OUT port on the decoder.
  • Page 4 Installation Guide AT-OMNI-121 RS-232 The AT-OMNI-121 provides transport of RS-232 protocol over IP which allows communication between a control system and an RS-232 device. This step is optional. Use wire strippers to remove a portion of the cable jacket. Remove at least 3/16” (5 mm) from the insulation of the RX, TX, and GND wires. Insert the TX, RX, and GND wires into correct terminal on the included captive screw connector, following the wiring diagram below.
  • Page 5 Installation Guide AT-OMNI-121 Audio The AT-OMNI-121 provides the ability to embed 2-channel analog audio on the HDMI OUT port or de-embed HDMI audio on the AUDIO OUT port. De-embedded HDMI audio is downmixed to 2-channel PCM. This step is optional. IMPORTANT: Audio embedding and de-embedding, using the analog audio outputs, requires the optional OmniStream power supply (AT-PS-48083-C).
  • Page 6 Installation Guide AT-OMNI-121 Accessing OmniStream using the built-in Web Server Launch the desired web browser and enter the IP address or domain name of the decoder in the address bar. Enter the username and password. Note that the password field will always be masked. The default credentials are: admin Username:...

  • Page 7: Mounting Instructions

    Installation Guide AT-OMNI-121 Mounting Instructions The AT-OMNI-121 decoder includes two Repeat steps 1 through 4 to attach the mounting brackets and four mounting screws, second mounting bracket to the opposite which can be used to attach the unit to any flat side of the unit.

  • Page 8: Warranty

    Installation Guide AT-OMNI-121 Warranty To view the product warranty, use the following link or QR code: https://atlona.com/warranty/. English Declaration of Conformity The English version can be found under the resources tab at: https://atlona.com/product/at-omni-121/. Chinese Declaration of Conformity 中国RoHS合格声明 由SKU列出於: https://atlona.com/about-us/china-rohs/. ®...

Table of Contents