Download
Share
Print this page
Panduit ATLONA AT-OMNI-112 Installation Manual
  1. Manuals
  2. Brands
  3. Panduit Manuals
  4. Media Converter
  5. Atlona OmniStream AT-OMNI-112
  6. Installation manual
Panduit ATLONA AT-OMNI-112 Installation Manual

Panduit ATLONA AT-OMNI-112 Installation Manual

Omnistream 112 dual-channel networked av encoder
Hide thumbs Also See for ATLONA AT-OMNI-112:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
OmniStream 112 Dual-Channel Networked AV Encoder
AT-OMNI-112
The Atlona AT-OMNI-112 is a networked AV encoder with two independent channels of encoding
for two HDMI sources up to 4K/60 4:4:4 and HDR (High Dynamic Range), plus embedded
audio and RS-232 or IR control pass-through. OmniStream is designed for high performance,
flexible distribution of AV over standard, off-the-shelf Gigabit Ethernet switches in commercial
audiovisual applications. The OMNI-112 features the advanced VCx™ codec which delivers
4K/60 4:4:4 video from encode to decode, with artifact-free presentation of computer-generated
content and fast-motion video, and ultra-low latency less than one frame. This dual-channel
encoder is housed in a half-width rack enclosure with front-to-back air flow, and is ideal for high-
density, compact installation in a centralized equipment location.
Package Contents
1 x AT-OMNI-112
1 x Push spring connector, 6-pin
1 x Wall/table mounting brackets
4 x Rubber feet
Operating Notes
•
OmniStream uses mDNS as the discovery mechanism. In order for mDNS to function
properly, there must not be restrictions applied to the network.
IMPORTANT: Visit http://www.atlona.com/product/AT-OMNI-112 for the latest
firmware updates and User Manual.
1
Installation Guide
AT-OMNI-112

Advertisement

loading

Related Manuals for Panduit ATLONA AT-OMNI-112

Summary of Contents for Panduit ATLONA AT-OMNI-112

  • Page 1 OmniStream 112 Dual-Channel Networked AV Encoder AT-OMNI-112 The Atlona AT-OMNI-112 is a networked AV encoder with two independent channels of encoding for two HDMI sources up to 4K/60 4:4:4 and HDR (High Dynamic Range), plus embedded audio and RS-232 or IR control pass-through. OmniStream is designed for high performance, flexible distribution of AV over standard, off-the-shelf Gigabit Ethernet switches in commercial audiovisual applications.
  • Page 2 Installation Guide AT-OMNI-112 Panel Descriptions HDMI LINK DISPLAY INPUT INPUT HDMI LINK DISPLAY VOLUME TREAM VOLUME TREAM RX TX RX TX HDMI IN ETHERNET RS-232 DC 48V HDMI IN ETHERNET RS-232 DC 48V AT-OMNI-112 AT-OMNI-112 REBOOT This LED indicator is green when the unit Press this button, using a small, pointed is powered and booted.

  • Page 3: Installation

    Installation Guide AT-OMNI-112 Installation Connect an Ethernet cable from the ETHERNET 1 and ETHERNET 2 ports on the encoder to a PoE-capable switch on the Local Area Network (LAN). Note that if a PoE-capable switch is not available, the 48V DC power supply (sold separately) must be connected to the encoder.
  • Page 4 Installation Guide AT-OMNI-112 RS-232 The AT-OMNI-112 provides transport of RS-232 protocol over IP which allows communication between a control system and an RS-232 device. This step is optional. Use wire strippers to remove a portion of the cable jacket. Remove at least 3/16” (5 mm) from the insulation of the RX, TX, and GND wires. Insert the TX, RX, and GND wires into correct terminal on the included push-spring connector, following the wiring diagram below.
  • Page 5 Installation Guide AT-OMNI-112 Accessing OmniStream using the built-in Web Server Launch the desired web browser and enter the IP address or domain name of the encoder in the address bar. Enter the username and password. Note that the password field will always be masked. The default credentials are: admin Username:...

  • Page 6: Mounting Instructions

    Installation Guide AT-OMNI-112 Mounting Instructions The AT-OMNI-112 encoder includes two Repeat steps 1 through 4 to attach the mounting brackets and four mounting screws, second mounting bracket to the opposite which can be used to attach the unit to any flat side of the unit.
  • Page 7 Installation Guide AT-OMNI-112 Notes...

  • Page 8: Warranty

    Installation Guide AT-OMNI-112 Warranty To view the product warranty, use the following link or QR code: https://atlona.com/warranty/. English Declaration of Conformity The English version can be found under the resources tab at: https://atlona.com/product/at-omni-112/. Chinese Declaration of Conformity 中国RoHS合格声明 由SKU列出於: https://atlona.com/about-us/china-rohs/. ®...