Table of Contents
Advertisement
Quick Links
OmniStream R-Type Single-Channel Networked AV Decoder
AT-OMNI-521
The Atlona OmniStream™ R-Type (AT-OMNI-521) is a networked AV decoder for an
OmniStream-encoded video stream up to UHD @ 60 Hz and HDR, plus embedded audio and
RS-232 or IR control pass-through. It is part of the OmniStream R-Type Series, designed
for high performance, flexible distribution of AV over Gigabit Ethernet in residential and light
commercial applications. The OmniStream 521 is HDCP 2.2 compliant and ideal for the latest
as well as emerging UHD and HDR displays. It features visually lossless compression with
pristine-quality video and graphics performance, plus extremely low, sub-frame latency from
encode to decode – critical for demanding applications such as gaming. This decoder includes
an HDMI output, high performance upscaling and downscaling, aspect ratio control, and video
wall processing, plus presentation enhancement features such as logo insertion and scrolling
on-screen text.
Package Contents
1 x AT-OMNI-521
1 x Push spring connector, 6-pin
1 x Wall/table mounting brackets
4 x Rubber feet
1 x Installation Guide
IMPORTANT: Visit http://www.atlona.com/product/AT-OMNI-521 for the latest
firmware updates and User Manual.
1
Installation Guide
AT-OMNI-521
Advertisement
Table of Contents
Related Manuals for Panduit ATLONA OmniStream R-Type Series
Summary of Contents for Panduit ATLONA OmniStream R-Type Series
- Page 1 Installation Guide AT-OMNI-521 OmniStream R-Type Single-Channel Networked AV Decoder AT-OMNI-521 The Atlona OmniStream™ R-Type (AT-OMNI-521) is a networked AV decoder for an OmniStream-encoded video stream up to UHD @ 60 Hz and HDR, plus embedded audio and RS-232 or IR control pass-through. It is part of the OmniStream R-Type Series, designed for high performance, flexible distribution of AV over Gigabit Ethernet in residential and light commercial applications.
-
Page 2: Operating Notes
Installation Guide AT-OMNI-521 Operating Notes • This product is powered using PoE (Power over Ethernet) and must be connected to a PoE-capable network switch. If the network switch is not PoE-capable, a PoE injector (purchased separately) must be used. • Atlona recommends using the Atlona Management System (AMS) which provides discovery, management, and configuration assistance. -
Page 3: Panel Descriptions
Installation Guide AT-OMNI-521 Panel Descriptions LINK LINK LINK TREAM TREAM TREAM RX TX RX TX RX TX HDMI OUT ETHERNET RS-232 / IR HDMI OUT ETHERNET RS-232 / IR ETHERNET RS-232 / IR HDMI OUT AT-OMNI-521 AT-OMNI-521 AT-OMNI-521 ETHERNET This LED indicator is green when the unit Connect an Ethernet cable from this port is powered. -
Page 4: Mounting Instructions
Installation Guide AT-OMNI-521 Mounting Instructions The AT-OMNI-521 decoder includes two Repeat steps 1 through 4 to attach the mounting brackets and four mounting screws, second mounting bracket to the opposite which can be used to attach the unit to any flat side of the unit. -
Page 5: Installation
Installation Guide AT-OMNI-521 Installation Connect an Ethernet cable from the ETHERNET port on the decoder to a PoE-capable switch on the Local Area Network (LAN). IMPORTANT: If the network switch is not PoE capable, a PoE injector (purchased separately) must be used. Connect an HDMI cable from the HDMI OUT port to a UHD/HD display. - Page 6 Installation Guide AT-OMNI-521 RS-232 The AT-OMNI-512 provides transport of RS-232 protocol over IP which allows communication between a control system and an RS-232 device. The top three terminals must be used. This step is optional. Use wire strippers to remove a portion of the cable jacket. Remove at least 3/16”...
- Page 7 Installation Guide AT-OMNI-521 Configuration Launch a web browser and enter the IP address of AMS, in the address bar. Enter the required login credentials. Click the Login button. The AMS Dashboard will be displayed. Click the icon, in the upper-left corner of the AMS Dashboard. Click Devices from the fly-out menu.
-
Page 8: Connection Diagram
Installation Guide AT-OMNI-521 Click the desired decoder from the Unassigned device list. Once the unit is selected, the AMS interface for the decoder will be displayed. Refer to the User Manual for more information on the AMS interface. Connection Diagram Automation Control System IT AL... -
Page 9: Troubleshooting
Installation Guide AT-OMNI-521 Troubleshooting Problem Solution PWR indicator is off. • If using a PoE (Power-over-Ethernet) switch, make sure that the port on the switch that is connected to the decoder, has PoE enabled. When the decoder is powered using PoE, the PWR indicator will be green. •... - Page 10 Installation Guide AT-OMNI-521 Notes...
- Page 11 Installation Guide AT-OMNI-521 Notes...
- Page 12 Installation Guide AT-OMNI-521 Toll free US International atlona.com 877.536.3976 41.43.508.4321 • • © 2020 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners. Pricing, specifications and availability subject to change without notice. Actual products, product images, and online product images may vary from images shown here.