Hardware Not Supplied In The Shipping Carton - SimpliVity OmniStack Installation And Maintenance Manual

Part
Power cords (locale specific)
1 SFP+ Direct Attach (Twinax) cable
Sliding rail kit
Cable Management Arm kit (optional)
Printed documentation

Hardware not supplied in the shipping carton

Your network environment might require additional hardware components not supplied in the shipping
carton.
Hardware
Rack
1GbE data cables
Chapter 2: Install the server hardware
Description
■ Two standard power cords.
■ Two rack power distribution unit (PDU) cords.
Connects a 10GbE interface on one server directly to a
10GbE interface on another server. Depending on your
network configuration and the distance between the
server, you might need different or additional cables.
Contains the left and the right rails, two hook and loop
straps, and detailed installation documentation.
Contains the CMA assembly and installation
documentation.
■ Hardware Installation Quick Start
■ Configuration and Deployment Quick Start
■ Product Information Guide (safety and regulatory
notices)
■ End User License Agreement
Description
19 inch (48.3 cm), four-post,
toolless rack.
Two Category 5E or Category 6
cables with RJ45 connectors.
An optional third cable is
required to use the IPMI port for
remote console access.
Application
Provides easy access to
the server hardware in your
computing environment.
Connects the 1GbE network
interfaces on each server to a
1GbE switch. This is required
only if you are connecting the
1GbE network interfaces on
each server to a switch, such as
in a direct connected or switch-
connected network configuration,
for example.
21