Altitude; Vibration And Shock; Agency Compliance; About Hardware Upgrades - SimpliVity OmniStack Installation And Maintenance Manual

Specification
Temperature (non-operating, in storage)
Humidity (operating)
Humidity (non-operating)

Altitude

Each UCS C240 M4SX server has specific altitude limitations when operating or in storage.
Specification
Altitude (operating)
Altitude (storage)

Vibration and shock

A UCS C240 M4SX server configured for deployment in a SimpliVity Federation does not exceed the
vibration and shock limit specifications for a fully-configured enclosure.

Agency compliance

A UCS C240 M4SX server, when configured for deployment in a SimpliVity Federation, meets the same
compliance standards as a standard Cisco UCS C240 M4SX server.

About hardware upgrades

If you would like to upgrade the server hardware components, contact
Note:
Never install additional options other than those approved for installation by
so will void your warranty and might cause serious server instability and potential data loss.

About firmware revisions

The OmniStack software requires that each supported platform is running a specific firmware revision.
To avoid compatibility issues, contact
Note:
If your server, or any management software, has automatic software updates enabled, disable this
feature to avoid installing unsupported firmware revisions.
Chapter 1: Hardware overview
Description
–40 to 149°F (–40 to 65°C)
10 to 90%
5 to 93%
Description
0 to 10,000 ft
0 to 40,000 ft
Customer Support before making any firmware changes.
Customer Support.
Customer Support. Doing
19