Creating Report Templates - Carel boss User Manual

ENG

3.8 Creating report templates

For a snapshot of site conditions or operations, log or HACCP variables can be printed and/or exported.
Reports can be printed on demand or automatically at regular intervals. A report template must first be set in
both cases. The template indicates the time period in question (real time or at a set interval), data acquisition
frequency (only for period reports) and the variables to be printed/exported.
Note: before defining a report, set the variables to be recorded in logs and recording procedures. See
procedure Customising device configuration.
Note: after having defined the report template, it can be printed immediately (under Report
archive Print) or at regular intervals based on the scheduler (under Activities
1. Under Report
Template Add enter the name of the report
template (e.g.: power consumption), the interval,
layout, sample frequency, output format and
whether it's an HACCP report.
Note: if set as an HACCP report, only the variables
defined as HACCP in the log configuration are included.
2.
Click Devices or Device models and select a model:
the list of devices of that type appears in the left
column and its log or HACCP variables appear in
the one on the right.
3.
Select all the variables to add to the report and click
: the selected variables appear in the Current
configuration table. Select another device model
and add other variables.
4.
Click Add: the report template is added to the
report list.
5.
To call up a report manually, open the Report page
and select the template.
6.
If this report is not real-time, the frequency and
period can be set.
7.
Click Print
+040000260 - 1.0 - 22.09.2017
Report management
16
Report
Activity scheduler).