ENG
3.
3.1 Quick configuration wizard
A simple procedure is available under the Configurazione
of boss, divided into five steps.
Nota: To no longer display the Quick configuration wizard when starting, select the corresponding flag;
to start the guided procedure click Start, while to exit the procedure, click Exit.
The following steps comprise simple system setup:
•
Site information
•
Line configuration
•
Alarm management and I/O configuration
•
HACCP report configuration
•
guardian configuration.
1. Site information
First step: insert plant name (see Mask on side)
+040000260 - 1.0 - 22.09.2017
COMPLETING INSTALLATION
Fig. 3.a
8
Setup Wizard menu to set the basic settings