Agilent M9302A Block Diagram; Step 5: Verify Operation Of The M9302A Module - Agilent Technologies M9302A Startup Manual

Agilent M9302A Block Diagram

Step 5: Verify Operation of the M9302A Module

The intention of this step is to verify correct operation of the newly installed module. Run Agilent Connection
Expert (from the desktop icon, or from Start > Programs > Agilent IO Libraries Suite > Agilent Connection
Expert). It will display the modules that are installed. Review the configuration data and then launch the SFP.
This will provide control of the module for self test and other operational verification procedures.
Agilent M9302A Instrument Properties
Agilent M9302A PXI Local Oscillator Startup Guide
Step 5: Verify Operation of the M9302A Module
If the module does
not appear in the Agilent Con-
nection Expert, restart your PC or
embedded controller and start Agi-
lent Connection Expert again.
17