M9302A Introduction; Related Documentation; Follow The Startup Sequence - Agilent Technologies M9302A Startup Manual

M9302A Introduction

M9302A Introduction
The scope of this Startup Guide is to detail the processes of receiving and installing the Agilent M9302A PXI
Local Oscillator, installing the required software, and verifying basic module operation. If you have any questions
after reviewing this information, please contact your local Agilent Technologies Inc. representative or contact us
through our website at www.agilent.com/find/M9302A.

Related Documentation

This Startup Guide and the documentation listed below are on the CD and at
www.agilent.com/find/M9302A
M9302A Soft Front Panel help system
l
M9302A device driver API help systems (IVI-C/IVI-COM and LabVIEW G)
l
M9302A specifications (Data Sheet)
l

Follow the Startup Sequence

Closely follow the startup process flow in this document. Deviating from the sequence can
cause unpredictable system behavior, damage your system, and may cause personal injury.
Step 1: Unpack
and Inspect
8
(go to Document Library > Manuals).
Step 2: Verify Shipment
Step 3: Install Drivers and Software
Step 4: Install Module
Step 5: Verify Operation with the Soft Front Panel (SFP)
Step 6: INSTALLATION PROCESS COMPLETE.
Proceed to program your product through the API.
Agilent M9302A PXI Local Oscillator Startup Guide