Bromic Heating Cobalt Installation, Instruction And Service Manual page 9

INSTALLATION INSTRUCTIONS
CONTINUED...
STEP 3:
Ensure 2x screws are assembled to the bracket at the back of the heater. Bring
heater up to the extension arm and hang the heater on the bracket by hooking the
2x screws into the mounting slots. Tighten the 2x screws to secure heater.
STEP 4:
Position the heater at correct angle for the selected mounting option. Insert 2x
screws and nuts supplied to lock the heater at correct angle.
www.bromic.com/heating
9