Bromic Heating Cobalt Installation, Instruction And Service Manual page 2

IMPORTANT
This manual contains important information about the assembly, operation, and mainte-
nance of Cobalt Gas Heaters. Please pay close attention to the important safety informa-
tion shown throughout this instruction manual. Any safety information will be
•
•
•
•
•
•
Telephone:
Note: Bromic Heating Pty Ltd reserves the right to make changes to specifications, parts, components and equipment without prior notification.
This Installation, operation and service manual may not be reproduced in any form without prior written consent from Bromic Heating Pty Ltd.
2
accompanied by thefollowing safety alert symbols:
DANGER, WARNING,
READ THIS MANUAL CAREFULLY before installing or
servicing this product.
Improper installation, operation, or maintenance can result in
death, severe injury, or property damage.
Installation must be carried out by Authorized person/s in
accordance with local codes, or in the absence of local codes,
with the National Fuel Gas Code, ANSI Z223.1/ NFPA 54,
Natural Gas and Propane Installation Code, CSA B149.1, or
Propane Storage and Handling Code, B149.2.
The heater, when installed, must be electrically grounded in
accordance with local codes or, in the absence of local codes,
with the National Electrical Code, NFPA 70 or the
Canadian Electrical Code, CSA C22.1.
For either outdoor or non-residential indoor use only.
NOT FOR USE IN RESIDENTIAL DWELLINGS.
This heater is not approved for use in any indoor residential
applications.
This appliance MUST be protected from rain.
Head Office: 10 Phiney Place, Ingleburn, Sydney, NSW 2565 Australia
1300 276 642 (within Australia) or +61 2 9748 3900 (from overseas)
Email: info@bromic.com
www.bromic.com/heating
IMPORTANT
Fax:
Web: www.bromic.com/heating
+61 2 9748 4289