Computer Setup-Main; Computer Setup-Security - HP 280 G4 Maintenance And Service Manual

Computer Setup–Main
NOTE: Support for specific Computer Setup options can vary depending on the hardware configuration.
Table 5-1 Computer Setup—Main
Option
Main
Computer Setup—Security
NOTE: Support for specific Computer Setup options can vary depending on the hardware configuration.
Table 5-2 Computer Setup—Security
Option
Administrator Password
Power-On Password
42 Chapter 5 Computer Setup (F10) Utility
Description
System time
●
Select to change.
● System date
Select to change.
Product name
●
● System family
System board ID
●
● Born on date
Processor type
●
● Total memory
BIOS vendor
●
● BIOS revision
Device firmware revision
●
Select the view the following information: Embedded controller, Intel Management Engine, Graphic
Output Protocol
Serial number
●
UUID
●
● System board CT number
Factory installed OS
●
● System log
Select to view logs.
● Build ID
Feature byte
●
Description
Lets you set and enable a BIOS administrator password, which prevents unauthorized access to the Setup
Utilities. Default is no password.
Lets you set and enable a power-on password, which prevents unauthorized computer system start
(boot). Default is no password.