Front Bezel - HP 280 G4 Maintenance And Service Manual

Front bezel

1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the optical drive
4. Pull the four tabs upward (1), and then rotate the bezel off the computer (2).
IMPORTANT:
To install the front bezel, reverse the removal procedure.
26 Chapter 4 Removal and replacement procedures
(Preparation for disassembly on page
(Access panel on page
(Optical drive on page
A cable connects the power button in the bezel to the system board.
18).
22).
16).