●
F10: Save and exit
Esc: Exit Setup.
●
●
Enter: Select or enter submenu
Up/Down: Select item
●
●
Left/Right: Select screen
4.
To apply and save changes, select Exit > Save Changes and Exit.
●
If you have made changes that you do not want applied, select Ignore Changes and Exit.
To restore settings to original values, select Restore Factory Defaults as Default.
●
NOTE:
Restore Security Settings to Factory Defaults at the bottom of the Security menu.
NOTE:
CAUTION:
Do NOT turn the computer power OFF while the BIOS is saving the Computer Setup (F10) changes
because the settings could become corrupted. It is safe to turn off the computer only after exiting the F10
Setup screen.
Computer Setup–Main
NOTE:
Support for specific Computer Setup options may vary depending on the hardware configuration.
Table 6-1
Computer Setup–Main menu
Option
System Information
Settings in the Security menu are not modified by Apply Defaults. Those values are reset by
Not all settings shown in the following sections are available for all models
Description
●
System Time (editable)
●
System Date (editable)
Product Name
●
●
System Family
●
Product Number
●
System Board ID
●
Asset Tag
●
Ownership Tag
●
Born On Date
Processor Type
●
●
Total Memory
●
BIOS Vendor
●
BIOS Revision
●
Device Firmware Revision (select to see Intel ME and Graphic Output Protocol revision numbers)
●
Serial Number
●
UUID
Serial Board CT Number
●
●
Factory Installed OS
Computer Setup (F10) Utilities
73