13 Specifications - HP 280 G4 Maintenance And Service Manual

13 Specifications

Table 13-1 Specifications
Chassis
Height
Width
Depth
Approximate Weight
Temperature Range
Operating
Nonoperating
NOTE: Operating temperature is derated 1.0° C per 300 m (1000 ft) to 3000 m (10,000 ft) above sea level; no direct sustained
sunlight. Maximum rate of change is 10°C/Hr. The upper limit can be limited by the type and number of options installed.
Relative Humidity (noncondensing)
Operating
Nonoperating (38.7°C max wet bulb)
Maximum Altitude (unpressurized)
Operating
Nonoperating
Power Supply
Output
Efficiency
Operating Voltage Range
Rated Voltage Range
Rated Line Frequency
Operating Line Frequency
This system uses an active power factor-corrected power supply. This allows the system to pass the CE mark requirements for use in
1
the countries of the European Union. The active power factor-corrected power supply also has the added benefit of not requiring an
input voltage range select switch.
1
U.S. Metric
3.74 in 95 mm
10.63 in 270 mm
11.65 in 296 mm
9.23 lb 4.2 kg
32° to 104°F 0° to 40°C
–22° to 140°F –30° to 60°C
10% to 90% 10% to 90%
5% to 95% 5% to 95%
10,000 ft 3048 m
30,000 ft 9144 m
180 W
Up to 85%
90 V ac to 264 V ac
100 V ac to 240 V ac
50 Hz to 60 Hz
47 Hz to 63 Hz
101