HP 280 G4 Maintenance And Service Manual page 97

Set a schedule for running diagnostics unattended. You can also start diagnostics immediately in
●
interactive mode by selecting Execute Remote HP PC Hardware Diagnostics.
Set the location for downloading the diagnostic tools. This feature provides access to the tools from the
●
HP website or from a server that has been preconfigured for use. Your computer does not require the
traditional local storage (such as a hard drive or USB flash drive) to run remote diagnostics.
Set a location for storing the test results. You can also set the user name and password that you use for
●
uploads.
Display status information about the diagnostics run previously.
●
To customize Remote HP PC Hardware Diagnostics UEFI settings, follow these steps:
1. Turn on or restart the computer, and when the HP logo appears, press
2. Select Advanced, and then select Settings.
3. Make your customization selections.
4. Select Main, and then Save Changes and Exit to save your settings.
Your changes take effect when the computer restarts.
Using Remote HP PC Hardware Diagnostics UEFI settings (select products only)
f10 to enter Computer Setup.
89