Figure 48. Communication Wiring Access; Lansafe Power Management Software - Eaton 9355 User Manual

Figure 48. Communication Wiring Access

6. Connect the cables to the appropriate location.
See paragraph
7. Reinstall the communication wiring access plate.
8. Replace the UPS front door.
9. Continue to
6 6 . . 2 2 C C o o m m m m u u n n i i c c a a t t i i o o n n O O p p t t i i o o n n s s
The Eaton 9355 UPS has serial communication capabilities through the DB-9 communication port or through an
X-Slot card in one of the available bays. In addition, the LanSafe Power Management Software can be installed
and used to communicate with the UPS via one of the serial communication connections.
The UPS supports two serial communication devices according to the following table:
Independent
X-Slot 1
Any X-Slot card
Any X-Slot card
Any X-Slot card
Communication
Wiring Access Plate
6.2 Communication Options
Chapter 7 UPS Operating Instructions
X-Slot 2
Any X-Slot card except the Eaton Modem Card
Eaton Relay Interface Card
Powerware Hot Sync CAN Bridge Card
Not in use
or paragraph 6.3 Control Terminals
to start up the UPS.
Multiplexed
Eaton 9355 UPS (20/30 kVA) User's Guide 164201626—Rev H0
Communication
for detailed information.
DB-9 Communication Port
Not in use
Available
Available
71