Paradyne FrameSaver SLV 9126 Installation Instructions Manual page 12

Setting Up Automatic Backup Configuration
The Automatic Backup Configuration feature is used to automatically create alternate
DLCI records and PVC connections on the ISDN DBM (backup) interface.
This feature is already set up in FrameSaver units with a DBM.
Single_Site_Backup is the default for a BRI DBM.
Multi_Site_Backup is the default for a PRI DBM.
See the User's Guide for additional information.
Modifying ISDN Link Profiles
1. Select Link Profiles, then Modify.
2. Add a name and phone number to the ISDN Link Profile(s) created by Automatic
Backup Configuration.
– Name for the destination entered (e.g., Tampa). The default setting of HQ_Site.
– Link Status is set to Auto.
– Phone numbers entered:
Originating Unit
Outbound phone number.
Valid characters include:
Numbers (0 – 9)
Special characters * and #
Spaces
Parentheses ( )
NOTE:
Remember to include local dial-out numbers (i.e., 9, then the number).
– Maximum Link Rate is changed, if necessary. The default setting is 64 kbps.
3. Save the configuration.
Setting the Criteria for Automatic Backup
1. Enable Auto Backup.
Main Menu
When a failure occurs, the unit automatically enables the Alternate Link and traffic
is rerouted over the backup (alternate) interface.
2. Specify When Auto Backup Allowed – Always or Restrict. If Restrict is selected,
specify the days and hours of the week during which automatic backup can take
place.
3. Save the configuration.
Configuration Auto Backup Criteria
Answering Unit
Inbound Calling ID1 and ID2. These
are the phone numbers of units from
which calls will be accepted.
Valid characters include:
Numbers (0 – 9)
12