Polycom WCMICS VSX Series Getting Started Manual page 15

To swap the views shown in the PIP and the main screen:
1. If the PIP is not showing, press
display the PIP on screen.
2. Press Camera and select the
During calls using a single monitor and the Dual Monitor Emulation feature
(split-screen viewing), without content, you can use the PIP button to
scroll through the following screen layouts:
1. Near and far sites, same size, side by side
2. Far site big, near site small
3. Near site big, far site small
4. Near site, full screen
5. Far site, full screen
PIP on the remote control to
Swap PIP icon.
15