Polycom WCMICS VSX Series Getting Started Manual page 12

To select a near-site or far-site camera or other video source:
1. If you are in a call, press
site or far-site camera or other video source. The icon on the screen
indicates which you can select:
2. Press Camera on the remote control. Then press the number for the
camera or other video source you want to select at the near or far site.
For example, press 1 to select the main camera.
The image from the camera or video source you selected appears on the
screen.
To adjust a camera using the remote control:
1. Press Near or
camera.
2. Press the arrow buttons on the remote control to move the camera up,
down, to the left, or to the right.
3. Press Zoom to zoom out or in.
Near or Far to select either a near-
If you see this, you can
control a near-site camera
or video source
If you see this, you can
control a far-site camera or
video source
Far to select either a near-site or far-site
12