Table of Contents
Advertisement
Operation
Plug the Power Cable to the CD-Receiver and into the electrical outlet.
Note! Check "Additional Information" for other useful operating instructions.
ECO-Power/Standby features
Switching ON / OFF
When you connect the CD-Receiver to the electrical outlet for the first time, it will be in the Stand-
by mode.
Standby button to switch the CD-Receiver on.
• Press the
The word [HELLO] will be shown on the Display.
• A countdown of 10 seconds will start for preheating of the CD-Receiver.
Then, the CD-Receiver will switch to the last selected input.
Standby button to switch the CD-Receiver back to the Standby mode.
• Press the
The words [BYE BYE] will be shown on the Display.
Switching the CD-Receiver to ECO Power/Standby mode
Press and hold the
or Normal Standby.
• ECO Power Standby mode
The Clock will not be displayed.
Press the CLOCK button to display the Clock (if set) on the Display.
• Normal Standby mode
The Clock (if set) is displayed on the Display.
14
Standby button for 2 seconds or more to switch to the ECO Power Standby
Advertisement
Table of Contents
