The first of these screens allows the identification and address to be
configured:
BACnet ID:
Static IP address: This is an address that is used when DHCP is
Changing BACNet values
Use the keypad arrows to scroll down to select the desired line
and press Enter to select it.
Selecting BACnet ID activates the field. The ID value (0‐4194303)
can be increased or decreased using the up or down keypad
arrows
If the Static IP address option is selected, the following screen ap‐
pears. All controllers are shipped with a preset IP address as shown in
the example below.
(Building Automation and Control Networks) is the
device ID number assigned to this particular
controller on a network.
disabled.
75