Product And Sensor Types - Honeywell 301C User Manual

Product and Sensor Types
This is a list of all the (preprogrammed) product types available from
the Identification option in the Tx Info menu.
1. Tx Info
-Ident-
E3Point
CO
Compatible products:
E3Point
420MDBS
ECFX
301R
301EM
SQN8X
XCD
XNX
IAQPoint2
Legacy Vulcain products
Note: When Group is selected as a product type, the remaining Tx
INFO screens are not accessible (because each product in the
group has already been individually programmed). Only the
Ident and Erase current Tx screens will be available.
The sensor type list applies to address ranges 1‐96 and is not depend‐
ent on the type of product selected. Devices in the address range
from 97‐170 will display a BACNet object identifier, rather than a sen‐
sor type.
*An additional Product Type, simply called "Group", represents a
group created in the Groups Menu in the controller. When scrolling
through the available product type list, this name will appear as many
times as there are groups created in the controller (example: Group 1,
Group 2, Group 3, etc.). If a group is selected as the product type,
then the sensor type options are limited to MIN, MAX and MEAN.
121
27