Honeywell 301C User Manual page 59

The second main screen in the Config menu allows a new user pass‐
word to be set.
The default password is 2967. Select Set User Password to change the
password:
When the first digit blinks, change the value by using the
•
up/down keypad arrows to increase or decrease the number
Use the left/right keypad arrows to move from one digit to the
•
next.
When the desired e has been set, press Enter to validate it and
•
exit the editing mode.
Note: Contact Honeywell technical support for help with lost passwords
at 1-800-563-2967.
The slave port is not used.
59