LED Definitions
The controller is equipped with 7 LEDs that provide a status for each
function related to that indicator:
LED
A blinking red light indicates that an event has been acti‐
Alarm A
vated. A constant red light indicates that one or more
transmitters have reached Alarm A or Alarm 1.
When the red indicator is on, one or more transmitters have
Alarm B
reached Alarm B or Alarm 2.
When the red indicator is on, one or more transmitters
Alarm C
have reached Alarm C.
Green indicates that the unit is powered up and functional
Power
When the amber LED is on, it indicates a fault (i.e. a com‐
Fault
munication, maintenance or device problem)
When the amber LED is blinking, it indicates that the con‐
Tx
troller is sending information or requests on the communi‐
cation channel.
When the green LED is blinking, it indicates that the
Rx
controller is receiving information.
Each of these functions is linked to parameters programmed in the
control unit, which we will discuss in the following section.
Description
19