The bottom right portion contains the operand, which defines what
device or group of devices on which the Event will be based. The list
provides the following options:
Option
OFF
Used for status on binary inputs (ex.: used with 301ADI)
ON
Used for status on binary inputs (ex.: used with 301ADI)
Bases trigger on maintenance alarm, communication fail‐
Fault
ure or device failure
If the chosen device or group has an Alarm A or Alarm 1,
Alrm A
an event will be triggered.
If the chosen device or group has an Alarm B or Alarm 2,
Alrm B
an event will be triggered
If the chosen device or group has an Alarm C, an event will
Alrm C
be triggered.
The Coverage Period screen allows the period that will be covered by
the Event to be defined. (The time frames for each of these periods
can be defined in the controller Config menu.) This option provides
two further selection fields:
Day definition field: allows All day, Daytime, or Nighttime to be se‐
lected
Week definition field: Weekend, Working Days, All week
1. Use the keypad up or down arrows to scroll to either All day or All
week
2. Press Enter to select. The value can now be changed
3. Use the keypad up or down arrows to scroll through options (see
above)
4. Press Enter to select.
Description
48