Using The Thin Client Manager Operations Utility To Recover The Flash Image Of A Workstation - IBM NetVista N2200l Manual

Attention: Recovering the flash image of a workstation can take as long as
10 minutes. Do not power off the workstation until the flash recovery process
is complete.
After the recovered workstation reboots, the Setup Utility appears on the
display.
Using the Thin Client Manager Operations Utility to recover
the flash image of a workstation
You can use the Thin Client Manager Operations Utility to recover the flash image
of a workstation remotely. To find out how to perform this and other workstation
management tasks, refer to the Operations Utility product help. Click
Help—>Help Topics from the Operations Utility window. For an overview, refer to
IBM NetVista Thin Client Manager Operations Utility (SA23-2813) available at the
following URL:
http://www.ibm.com/nc/pubs
17
Altering the flash image