Learning about the hardware
This section provides detailed hardware information about the N2200l thin client
— Hardware Type 8363 (Model Lxx), hereafter referred to as N2200l thin client.
Standard hardware
The standard N2200l thin client hardware includes the following:
v 32 MB of permanent memory, which includes 3 MB dedicated to video memory
v 64 MB of memory on a Dual Inline Memory Module (DIMM)
v Integrated Ethernet communication
v 16-bit internal and external sound
v One 32 MB CompactFlash card with preloaded software
v 2 USB ports for a keyboard and other USB devices
Hardware connectors
Your N2200l thin client hardware includes standard connectors, standard pin,
signal, and signal direction configurations. See "Appendix F. Connector pin
information" on page 43 for details.
Figure 1. Hardware connectors
Communication hardware
Your N2200l thin client includes an integrated Ethernet connection.
For a 10 Megabit (Mb) line speed operation, you need a category 3 or higher
Unshielded Twisted Pair (UTP) type of cable. For a 100 Mb line speed operation,
you need a category 5 UTP type of cable.
Refer to "Appendix F. Connector pin information" on page 43 for communication
cable specifications.
© Copyright IBM Corp. 2001
3