Safety Notices; Danger Notices - IBM NetVista N2200l Manual

For linux

Table of Contents

Safety notices

Safety notices contain information that is related to using the IBM

client in a safe manner. These notices can be in the form of a danger, caution, or

attention notice.

The following danger notices call attention to situations that are potentially lethal

or extremely hazardous. These notices pertain throughout this book.

DANGER

To prevent a possible electrical shock during an electrical storm, do not

connect or disconnect cables or station protectors for communications lines,

display stations, printers, or telephones. (RSFTD003)

To prevent a possible electrical shock from touching two surfaces with

different electrical grounds, use one hand, when possible, to connect or

disconnect signal cables. (RSFTD004)

An electrical outlet that is not correctly wired could place hazardous voltage

on metal parts of the system or the products that attach to the system. It is the

customer's responsibility to ensure that the outlet is correctly wired and

grounded to prevent an electrical shock. (RSFTD201)

To prevent a possible electrical shock when installing the system, ensure that

the power cords for all devices are unplugged before installing signal cables.

(RSFTD202)

To prevent a possible electrical shock when adding the device to a system,

disconnect all power cords, if possible, from the existing system before

connecting the signal cable to that device. (RSFTD205)

To prevent a possible electrical shock, disconnect the power cord from the

electrical outlet before opening the unit. (RSFTD215)

NetVista thin

Table of Contents