Table of Contents
Advertisement
Appendix C. CompactFlash card
Follow these steps to verify if the CompactFlash card is installed properly.
Read "Safety notices" on page v before you continue with these instructions.
1. Perform Steps 1 to 4 in "Removing the logic unit" on
page 33.
2. Align the grooves on the sides of the CompactFlash
card A to the grooves of the flash card slot B .
Make sure to align the grooves properly, as you can
insert the CompactFlash card only one way.
3. Carefully press the CompactFlash card into the flash
card slot. To avoid hardware damage, do not force the
card into the flash card slot.
4. Perform "Reassembling the thin client" on page 34.
© Copyright IBM Corp. 2001
35
Advertisement
Table of Contents
