Configuring The Thin Client; Using The Setup Utility To Configure The Thin Client - IBM NetVista N2200 Reference Manual

Configuring the thin client

Before you can access applications on your server, you must configure your thin
client during the initial startup. The Setup Utility helps you with the configuration.
This section provides information on the "Using the Setup Utility to configure the
thin client".

Using the Setup Utility to configure the thin client

The setup utility allows you to perform the following tasks:
v Specify your keyboard language settings
v Set the resolution and frequency of your display
v Configure your Internet Protocol (IP) settings
v Perform advanced configurations, such as changing your boot file server settings
The first time you start the thin client, you must use the initial Setup Utility to
configure the thin client. The following menu is an example of a Setup Utility
menu:
Figure 2. Example menu
The menu number A makes it easy to navigate through the Setup Utility. Menu
numbers that begin with 2 are unique to the initial Setup Utility. The menu title
Use the arrow keys to select an option from the list of available options C . After
you select an option, specify a value in the corresponding value field D . Certain
fields allow you to select a value by using the Page Up and Page Down keys.
© Copyright IBM Corp. 2000
B tells you which menu you are using.
9