Teledyne 6600 Operating Instructions Manual page 141

Oil in Water
Interface Panel for input/output functions related to remote
communications.
Reference drawings
3
4 See section for the Alarms Function
a)
2.2, Part I under electrical connections
c DCS connections
1 Please refer to Section 1.5 Control
Unit
2 See Alarm Relays, section 2.2
3 See Digital Remote Cal Inputs for Zero
and Span; section 2.2
a Outline drawing
-physical locations and sizes of electrical and
sample connections
b Interconnect drawing (see addendum
drawings)
-indicates where electrical connections go
Sample Connections
a The customer connection to the oil in water analysis
system should enter in a downward position enabling
a constant available gravity fed non-freezing sample
with continuous flows capable of up to 5 liters per
minute at pressure provided.
b Assure there are no blockages nor fine filters at the
sample tap nor beyond up to the oil in water analysis
system.
Teledyne Analytical Instruments
See Alarm Relays, Section
(see addendum drawings)
Part III
Part III: 1-51