Summary of Contents for Ballard Designs Louis MQ080
Page 1
Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Louis Metal Console ITEM NUMBER: MQ080 ASSEMBLED DIMENSIONS : 26”H x 60”W x 19 1/2”D PRODUCTS ARE NOT INTENDED MADE IN INDIA FOR COMMERCIAL USE. UPDATED: 10/22/2019 Page 1 of 4...
Page 2
REQUIRED TOOLS: Phillips Screwdriver WARNING -Two person assembly suggested. Tip-Over Hazard Remove all parts, hardware and protective packaging from carton Serious or fatal crushing injuries can occur from a furniture tip-over and carefully arrange on a clean, Prevent tipping accidents. Anchor your furniture. level, padded surface.
Page 3
STEP 1: On a clean, level, soft surface gently lay Console Body (C) onto its back. Insert each Leg (A) into T-nuts on underside and turn until firmly tightened. STEP 2: Lift and place Console upright onto Legs and insert Shelf (B) into center compartment. Customer Service: 800-367-2810 Page 3 of 4 Online: www.ballarddesigns.com...
Page 4
ANCHORING HARDWARE (ANTI-TIP) Ltr. Qty. Hardware Included Bracket WARNING Screw Tip-Over Hazard Serious or fatal crushing injuries can occur from a furniture tip-over Prevent tipping accidents. Anchor your furniture. Retention Belt 1. Locate and mark a Wall Stud behind console at location for installation. 3.