Table of Contents
Related Manuals for Ballard Designs SINCLAIRE MQ012
Summary of Contents for Ballard Designs SINCLAIRE MQ012
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: SINCLAIRE MEDIA CONSOLE ITEM NUMBER:MQ012 DIMENSIONS OF ITEM ASSEMBLED: 26”H x 64”W X 16”D PRODUCTS ARE NOT INTENDED MADE IN CHINA FOR COMMERCIAL USE. UPDATE: 06/14/2018 Page 1 of 4...
- Page 2 NOTE: Assemble the Console in desired location for use. Shelf (D) Hardware Located Here (A-C) TOOLS NEEDED: NOTE: When unpacking, lay the parts on -Requires a screwdriver. a padded surface such as the packaging provided. -Power drill suggested. Be sure to locate all hardware before throwing -Assembly requires 2 or more people.
- Page 3 NOTE: Assemble the Console in desired location for use. STEP 1:Place the Shelf Supports (A) at the desired Shelf heights and lay the Shelves (D) on the Supports. STEP 2: If the Console is uneven, adjust the levelers inside the bottom corners of the Console by using a flat head screwdriver.
- Page 4 ANTI TIP INSTALLATION: PART B Ltr. Qty. Hardware Included Small Screw Large Screw Brackets Retention Belt Attach a Bracket (G) to the back of the Wine Rack with the Small Screw (E) through the smaller hole. Then screw in the remaining Bracket (G) to the wall stud with the Large Screw (F) 2 inches below the Bracket attached to the furniture.
Need help?
Do you have a question about the SINCLAIRE MQ012 and is the answer not in the manual?
Questions and answers