Summary of Contents for Ballard Designs Fenwick MQ112
Page 1
Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Fenwick Media Console ITEM NUMBER: MQ112 ASSEMBLED DIMENSIONS : 27”H x 98 5/8”W x 19”D PRODUCTS ARE NOT INTENDED MADE IN CHINA FOR COMMERCIAL USE. UPDATED: 4-15-2020 Page 1 of 2...
Page 2
Assemble in location for intended use. TOOLS NEEDED: Hardware Packet -Flathead Screwdriver -Two person assembly suggested. Shelves (D) Remove all parts, hardware and protective packaging from carton and carefully arrange on a clean, level, padded surface. NOTE: To avoid accidentally discarding small parts or hardware, retain all carton contents until Door (E)
Page 3
Assemble in location for intended use. STEP 1: Place Console (D) in location for use. Console is equipped with Rotary Levelers in each corner accessible from INSIDE. Insert a Flathead Screwdriver into hole and turn clockwise/counter- clockwise until Console is level. When complete, insert Wood Plugs (B) to cover holes. STEP 2: Locate and position Shelf Supports (A) into pre-drilled holes.
Page 4
Assemble in location for intended use. STEP 3: Align and place wheels on bottom of two Doors (F) into REAR TRACK in base of Console (D) then gently push top of each Door into Console. NOTE: Be certain track guides on the top of each door are pushed in and locked before pushing door in.
Page 5
WALL ANCHORING HARDWARE (ANTI-TIP) Ltr. Qty. Hardware Included Large Screw Small Screw WARNING Tip-Over Hazard Bracket Serious or fatal crushing injuries can occur from a furniture tip-over Prevent tipping accidents. Anchor your furniture. Retention Belt Installation: 1. Place furniture against wall at desired location then locate and mark a Wall Stud behind unit. 2.
Need help?
Do you have a question about the Fenwick MQ112 and is the answer not in the manual?
Questions and answers