Connecting To External Fuel Supply - Nilfisk-ALTO TRUCK BOOSTER Operating Instructions Manual

3.8 Connecting to external
fuel supply
Original Instructions
The TRUCK BOOSTER can
be connected to an external
fuel supply. As a standard, the
machine is supplied with a 40 l
container.
Heating oil, DIN 51603-1 (with-
out bio diesel) can be used.
Diesel according to EN 590 (up
to 7% bio diesel) can be used
with the following restrictions:
Maximum storage time in high
pressure cleaner diesel tank: 1
month.
Diesel stored externally for
more than 6 months is not
allowed to be fi lled into Nilfi sk-
ALTO high pressure cleaners.
Diesel EN 590 is not recom-
mended for use in HPW's at
an ambient temperature below
0°C.
Diesel EN 590 from an open
container must not be used.
You can choose between "one"
and "two" -string connection,
where "one"-string only has one
supply hose (a) and "two"-string
has an additional return hose
(b) - see fi gure.
Please observe that in some
countries only the "one" string
system is approved.
The fuel hose for the external
fuel supply can be lead-in:
2
1. Through the bottom plate to
the oil pump.
2. Through the punch-out
pieces in the rear plate to
the oil pump.
See foldout at the end of this
manual.
Please observe the following
restrictions to fuel line.
TRUCK BOOSTER
11