Connecting The Printer; Printer Ports - Tektronix Phaser 300X User Manual

Connecting the printer

Printer ports

The printer accepts data through four ports:
1. LocalTalk
2. Serial (RS-232)
3. Parallel
4. Ethernet
The printer accepts data from all the ports at the same time. The printer
accepts print jobs on a first-come, first-served basis.
1 2
1 2 3 4 5 6 7 8 9
Reset Extended Skip Metric 1200 Blue Press Serial
Diagnostics * Startjob Paper Size Baud Rate Color Adjust
Run Power Up Run American Variable Off Off LocalTalk™ (RS-232)
Status
The SCSI port ( 5 ) is for connecting an external hard disk only. You cannot
connect a computer to this port or send print data through the SCSI
interface. Refer to "Adding a hard disk for font storage" on page B-5 for
more information on the SCSI port.
Note See "Interface cables and Ethernet adapters" on page 5-4 about
ordering cables and adapters for connecting the printer.
3
5 4
PXi
2
Getting Set Up
8873-05
2-7
User Manual