Reinstalling The Shipping Block - Tektronix Phaser 300X User Manual

Appendix
C
Moving Your Printer
After turning the printer off, Tektronix recommends that you let the printer
cool down for a minimum of 20 minutes before moving it. This provides
sufficient time so that the ink inside the printer has time to solidify.
Caution
Keep the printer level as you move it. If you move the printer a long
distance (transport it in a car or airplane), replace the shipping block to
protect the printhead and empty the waste bin. See the topics "Emptying
the waste bin" on page -5 and "Reinstalling the shipping block" on page C-2
for details.
Failure to allow enough cooling time for the ink to solidify can
result in ink spills that may damage the printer's internal
components.
C-1
User Manual