Changing Line Voltage - Tektronix Phaser 300X User Manual

C
Moving Your Printer

Changing line voltage

C-4
Phaser 300X Color Printer
If you move the printer to a country that uses a line voltage different from
the printer's factory setting, you can change the line voltage to the
appropriate setting by using the line voltage selector switch.
Warning Unplug the printer before changing the line voltage selector
switch. For your safety, do not remove the cover from the
printer. The line voltage selector switch is located next to the
On/Off switch.
Also, the new location may require a different power cord and fuse; see your
dealer for details.
1.
Line voltage selector switch.
1
8873-18