Tektronix Phaser 300X User Manual page 105

8. Install the paper tray.
9.
Press the
CLEAN PRINT HEAD
After you press the button, the printer feeds the 10 sheets of paper
through the printer so that the fuser cleaning pad cleans the fuser
roller.
10. Remove the paper tray.
11. Remove the fuser cleaning pad.
12.
Install a new fuser wiper.
13. Load another 10 sheets of standard office Bond paper (laser printer
or photocopy paper) into the paper tray. Be sure to load the paper
so that the long side of the paper enters the printer first, as shown
on page 4-22.
14.
Install the paper tray.
15. Press the
CLEAN PRINT HEAD
After you press the button, the printer feeds the 10 sheets of paper
through the printer.
If any ink is visible on the paper, repeat Steps 13, 14, and 15.
16. Return to normal operation by pressing the
reach this display:
Utilities
Exit
17. Press the
CLEAN PRINT HEAD
button.
button.
Vx.xx
Next
button to exit Utilities mode.
Caring for Your Printer
button to
TEST PRINT
4-29
User Manual
4