Spare Parts And Repairs; Recycling And Disposal - Siemens SIMATIC PRO Extension Units KP Series Operating Instructions Manual

Device maintenance and repair

5.3 Spare parts and repairs

Observe the information on chemical resistance
(http://support.automation.siemens.com/WW/view/en/39718396).
Procedure
1. Switch off the device.
2. Dampen the cleaning cloth.
3. Spray the cleaning agent on the cloth and not directly on the device.
4. Clean the device with the cleaning cloth.
5.3 Spare parts and repairs
Repairs
In the event of a repair, you must return the device to the Return Center in Erlangen. Repairs
may only be carried out at the Return Center in Erlangen.
The address is:
Siemens AG
Digital Factory Retouren-Center
c/o Geis Service GmbH, Tor 1-4
Kraftwerkstraße 25a
91056 Erlangen
Germany
You can find detailed information on the Internet at "Spare parts and repairs
(http://support.automation.siemens.com/WW/view/en/16611927)".
Spare parts
You can find spare parts and accessories for the HMI device in section
"Standard installation components (Page 18)".
5.4

Recycling and disposal

Due to the low levels of pollutants in the HMI devices described in these operating
instructions, they can be recycled.
Contact a certified disposal service company for electronic scrap for environmentally sound
recycling and disposal of your old devices, and dispose of the device according to the
relevant regulations in your country.
80
Operating Instructions, 05/2019, A5E43600360-AC
Extension Units KPxx