Siemens SIMATIC PRO Extension Units KP Series Operating Instructions Manual page 78

Configuring Extension Unit PROFINET and PROFIsafe
4.8 Extension Unit PROFIsafe - Safety configuration
Reading out diagnostic information of the safety module
Follow these steps to display the diagnostic information of an Extension Unit PROFIsafe that
is connected to a PLC.
1. Press the "Go online" button.
2. Select slot 0 of the Extension Unit PROFIsafe in the device view and click on the green
check mark in the top right-hand corner of the safety module.
The Diagnostics window opens.
In the Diagnostics window you have access to the advanced functions "Firmware update"
and "Reset to factory settings", among other things.
78
Operating Instructions, 05/2019, A5E43600360-AC
Extension Units KPxx