1.3
Design
1.3.1
Extension Unit enclosure
The figures below show the design of the Extension Units using the Extension Unit 22" as an
example.
Front view
①
②
③
Side view
①
②
③
④
Rear view
①
②
③
Extension Units KPxx
Operating Instructions, 05/2019, A5E43600360-AC
Mechanical interface to the PRO device with seal
Enclosure
Front
Enclosure
Terminal compartment cover
Connection compartment
Mechanical interface to a stand, to an Extension Unit or for the bottom cover (in case of sup-
port arm mounting)
Enclosure
Rear panel cover
Recess for the nameplate
Overview
1.3 Design
15